Peacock Digital Gauges, Indicators, Counters & Printers

• The batteries in these digital indicators have a service life of approximately 3000 hours under normal use.
• The digital display can be rotated (approx. 270°).
• Very compact size and long 25mm stroke.
• RS-232C data output capability.

• ZERO RESET:  Resetting to zero at any desired position.

• PRESET:  Preset at a desired value.

• DATA HOLD:  Data can be held for direct data output to a computer.

• MM/INCH:  Easily switch between metric and inch systems.

• Low Battery Warning Display:  "B" signifies low battery.

• Display Rotation:  Display can be rotated upside-down, sideways, or angled for easy reading.

• Counting Direction Conversion:  Plus & minus directions, for spindle movement, can be selected.

• LED display makes for easy reading.
• Data is printable via BCD-printer link.
• Linear scale eliminates mechanical errors.
• Display can be rotated 330°.
• Connect with a model PDP-1 printer to manage your data.
• Use with optional model SIS-6 stand.

• ZERO RESET:  Resetting to zero at any desired position.

• ERROR:  Mistaken entry will alarm.

• LED Display:  Orange LED light display makes test reading easy, even in dark areas.

• BDC OUT:  Connects with statistic computing printer to manage data.

• Display Rotation:  Display can be rotated up to 330° for easy reading.

• Counting Conversion:  Please specify either 0.001 or 0.01mm display at time of purchase.

• Flat Back Cover (lug back is standard)

• Lifting Lever (for lifting spindle LL-D20)

• Release (for lifting spindle RE-4)

• 10mm and 20mm measurement ranges are the easiest to use.
• Used in conjunction with digital counters, these gauges can be setup in places where dial gauges are now being used.
• Set the gauge by either stem or lug back.
• For lifting spindle, both lever and release types are available.

• Release (RE-4) lifting lever (LL-1).

• Dust-proof rubber spindle protector (BG-10).

• Flat back (GB3-D10), screws (S-110).

• Customer must specify if application is upside-down. The measuring force changes when the gauge is inverted.

• Release (RE-4).

• Flat back (GB3-D20).

• Customer must specify if application is upside-down. The measuring force changes when the gauge is inverted.

• Very sturdy ø20mm stem.
• Ultra-high precision is achievable with optional gauge stand (PDS-2).
• The model D-50 is available as a special gauge for high temperature conditions of up to +65°C (model D-50HT)
• Special gauges are also available with a dust-proof rubber spindle protector for dusty conditions (models D-50WA, D-50SWA, D-100WA, & D-100SWA).

• If spindle inner spring is removed, measuring force will be that of spindle itself (only when in upright position).

• D-50, D-50S:  1.0N (100gf)

• D-100, D-100S:  1.0N (110gf)

• Recommended stand is PDS-2.

• Level mounting clamp (GB-50).

• Customer must specify if application is upside-down. The measuring force changes when the gauge is inverted.

• Operated by battery (CR-2032)

• Connectable to a printer (PDP-1)

• Values close to measured values using a micrometer are obtainable if contact point size is the same.

• Operated by battery (CR2032)

• Connectable to a printer (PDP-1)

• Operated by battery (CR-2032)
• Connected to a printer (PDP-1)

• For printing of statistically processed data.
• Input of date & time via front control panel data keys for quality assurance data purposes.
• Items for statistic operation may be selected from mode 0 to 3.
• Out of spec values are printed in red.

• Printing method:  Dot style graphic

• Recording Paper:  Standard paper roll (69mm wide x 50mm dia.)

• Options: 
  -  Foot switch (FW-1)
  -  Connecting cable (for signal input)

• Method of data input:
  -  BCD positive logical, parallel/serial.
  -  RS-232C port.
  -  Centronics compatible.

• Blue fluorescent light display provides easy reading.
• Data output uses BCD codes and is "open collector" type.
• These digital counters can be connected to a pass/fail judgment system, D/A conversion system or printer.

Resolution:  0.005mm/0.01mm (0.005mm at time of shipment)

Resolution:  0.001mm

• Counting can be preset.
• Blue fluorescent light display provides easy reading.
• Equipped with multiple display function (for measurement of diameter, etc.)

Resolution:  0.005mm (0.01mm)

Resolution:  0.001mm

• C-5SS has resolution capability of 0.5µm.
• C-7HS has resolution capability of 0.1µm.
• Both C-5SS & C-7HS are recommended for very high precision measurement.

Resolution:  0.0005mm (0.5µm)

Resolution:  0.0001mm (0.1µm)

• Equipped with judgment function OK, +NB (No Go).
• Either 10µm or 1µm resolution setting can be selected.
• 2X or 1/2X display magnification.

Resolution:  0.01mm or 0.001mm (select by conversion switch)

• Peak-peak counter is most suitable for deviation testing.
• 3 test modes:  maximum amount, minimum amount, and deviation amount (can be alternately displayed.
• High speed calculation is processed in the hardware of the comparison circuit instead of in the CPU.

Resolution:  0.01mm

Resolution:  0.001mm

• These counters can calculate and display addition (ADD) and subtraction (SUB).
• They work best and most effectively when they are used for a continuous flow of workpieces.
• With judgment function of +NG, OK, -NG.

Resolution:  0.01mm

Resolution:  0.001mm

• Measuring a part of the radius face, computing and displaying curvature's radius (AS-6).
• Measuring radius of complicated design curve.
• Measured values are multiplied by set values and displayed: magnification is freely changeable (AS-8).
• For example, measurement using lever indicators or optical magnification instruments, etc.

Resolution:  0.001mm

Resolution:  0.001mm or 0.01mm

• Prints results of measurement and statistically processed values.
• Equipped with judgment function OK, +NG is printed out in red.
• For data management and storing of sheet materials.

Resolution:  0.001mm (1µm)

Resolution:  0.0005mm (0.5µm)

• Automatic memorization and printing of Peak of each blade/tooth.
• Automatically measures tooth height just by turning the workpiece.
• Equipped with judgment function OK, +NG; judgment for mean value is also available.

Resolution:  0.001mm

• Built-in delay time type, provides time lag when it is set in a workpiece.
• Can measure in 3 axes (X, Y & Z) with a built-in printer.

Resolution:  0.001mm (X,Y,Z axes)

• Suitable for system installation.
• Used as a counter in multi-point measurement control.

• Units to extend judgment function for C-5 and C-5S (COM-5).
• Units to extend judgment function for CP-5 and CP-5S (COM-6).
• Results of judgment on LED display and output for control by relay contact.

• When D-4 is connected to a recorder, the resulting analog figure can provide a continuous recording.
• Three convertible settings cover the entire testing range.