logo-new.JPG (25331 bytes)
 

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

bar-grn2.gif (4484 bytes)

 

Meiji ML7500 Series Metallurgical Microscopes

 

bullet

MEIJI ML7500 SERIES METALLURGICAL MICROSCOPES

 

  ML7520.jpg (26188 bytes)

The ML7500 Series features an Infinity Optical System for reflected light brightfield, darkfield and simple polarization technique.  Equipped with either an erect image binocular or non-erect image trinocular viewing head inclined at 30 and rotatable through 360 for comfortable viewing.  The ML7500 Series offers high quality and dependability with a revolving quadruple nosepiece and 50W Koehler-type illuminator. 

All ML7500 Series microscopes are supplied with styrofoam case, dust cover, and instruction manual.

Encompasses 2 configurations as listed below.

Btn-Org.gif (2686 bytes)

Viewing Heads

MA401/05, Binocular Head, erect image, with quartz depolarizer.

MA603/05, Trinocular Head, non-erect image, with quartz depolarizer.  A two position beam splitter beam splitter direct 100% of the light to the eyepieces or directs 80% of the light to the trinocular tube and 20% of the light to the eyepieces.

MA495/05, Inclined Trinocular Head, erect image, with quartz depolarizer.  A two position beam splitter beam splitter direct 100% of the light to the eyepieces or directs 100% of the light to the trinocular tube.

Illuminator

Vertical illuminator with full Koehler design equipped with 12V 50W Halogen light source, infinity system lens, field iris, aperture iris and filter slots.  Capable of brightfield, darkfield, or simple reflected light polarization technique.  Includes blue, green, yellow and neutral density filters (ND2 and ND8) in mounts.  Transformer and variable rheostat control are built in the microscope base.

     
Objective Changer & Objectives

Extra large, revolving quadruple ball-bearing nosepiece. 

Infinity corrected S-Plan brightfield/darkfield objectives:
MA331, BD S-Plan MET 4X/0.10, WD 16mm
MA332, BD S-Plan MET 10X/0.25, WD 7.4mm
MA333, BD S-Plan MET 20X/0.40, WD 5.2mm
MA334, BD S-Plan MET 40X/0.65, WD 0.8mm

Focusing Movement

Coaxial low positioned coarse and fine focus controls, graduated to 2 microns per division, are fitted with tension adjustment and safety auto stop.  The focus range is 35mm.   The movement runs in extra wide precision ball-bearing hardened steel tracks.

     
Eyepieces

MA407, Paired DIN KVW10X super wide 20mm field of view eyepieces.

Stage

Rectangular mechanical stage 172mm x 130mm top plate with 100mm x 100mm travel.  Equipped with precision ball bearing guides and low position drop down coaxial controls for X-Y movement.

Btn-Org.gif (2686 bytes)

MODEL BODY EYEPIECES OBJECTIVES ILLUMINATOR
ML7520 Binocular
(Erect Image)

KHW 10X, 20mm field of view

B.D. S-Plan MET 4X, 10X, 20X, 40X Vertical Koehler 12V 50W brightfield/darkfield and polarization techniques.   Includes blue, green, yellow and neutral density ND2 and ND8 filters
ML7530 Trinocular
(Non-erect Image)

 

Btn-Org.gif (2686 bytes)

The following accessories for measurement are available for the ML7500 Series:

  • MA414, Filar Micrometer Eyepiece with inclined monocular head.
  • MA255, Linear Micrometer, 10mm divided into 100 units, 21mm diameter for KHW10X eyepiece.
  • MA256, Linear Micrometer, 5mm divided into 100 units, 21mm diameter for KHW10X eyepiece.
  • MA284, Cross-line Reticle, 21mm diameter for KHW10X eyepiece.
  • MA540, Cross-line with 0.1mm graduations, 21mm diameter for KHW10X eyepieces.
  • MA292, Metal Stage Micrometer, 1mm divided into 100 units, 0.01mm.

 

Btn-Org.gif (2686 bytes)

  • Eyepieces:
    -  MA489, HWF 12.5X eyepiece, high eyepoint, field number 15mm.
    -  MA408, HWF 15X eyepiece, high eyepoint, field number 12.2mm
    -  MA409, HWF 20X eyepiece, high eyepoint, field number 9.2mm.
  • Objective:  MA335, BD S-Plan MET 60X/0.85, WD 0.3mm
  • MA686, Adapter to mount RMS standard thread objective to BD nosepiece.
  • MA275/05, Spare halogen lamp, 12V 50W for incident illuminator.
  • MA326, Spare halogen lamp, 6V 30W for transmitted illuminator.
  • MA327, Fuse 3A.

 

For more information on a product or to request a price quote, please contact us by phone at 877-837-7260 (toll free) or 408-871-7700, fax 408-871-7800, or email us at labtekdiv@labtek.net.

 

[Home]  [Microscopes]  [Illumination]   [Video & Lenses]  [Measuring]
[Services]  [Vendor List]  [Specials]

 

Copyright 1998, Terran Technology, Inc.; Labtek Division
Last modified: November 06, 2012